Photographer, Writer, Storyteller, IT networking professional

Back in the Saddle with SketchUp: Kicking Off Our Kitchen Remodel Design

Hey folks, it’s that time again—I’m diving headfirst into another home project, and this one hits close to the heart (and the stomach): our kitchen remodel. As of December 2025, I’m officially starting the design work in good ol’ SketchUp 3D. And let me tell you, it feels like coming home after a long trip.

I am finally starting my kitchen remodel in earnest in Sketchup 3D Pro. I had designed the center island in Sketchup a few years ago so still had that piece to start with and just dropped it into the design. I built out walls by using a tape measure and a new laser measuring device I have – very handy for one-man work. I found these KraftMaid cabinets in 3D Warehouse and dropped a few in place, along with a Sub Zero refrigerator. This is a very early initial rough draft. We are going to need to modify some walls and sheetrock and of course new flooring, but for now I want to get the design of the cabinets figured out with Kay.

I’ve been a SketchUp fan for years now. It’s been my go-to for several big projects around here, like designing the deck for our swimming pool, planning and building my massive 36’x60′ shop, and even crafting the custom kitchen island that’s been the star of our current setup (all of which I built myself). SketchUp just clicks for me; it’s intuitive, fast, and lets me visualize everything before I commit to cutting a single board.

Our current kitchen was somewhat remodeled about 15 years ago after our house got hit with a tornado. I designed and built the center island about 5 years ago. We are now ready for granite countertops, and figured this was a good time to rebuild the cabinets the way Kay wants them.

But here’s the funny part: I hadn’t touched it in a couple of years. Life got busy, projects slowed down, and since the Pro version isn’t cheap, I let my license lapse. No big deal, I thought—when the kitchen remodel idea finally bubbled up, I’d shop around for alternatives.

One challenge we have is that Kay does not like the pantry in the corner. I am not all that wild about it either. It is hard to get in and out of and just not very functional. We are trying to figure out what to do in this corner.
We are trying to figure out how to remove the pantry from the corner and reconfigure this corner of the kitchen. This is just the very early planning stages right now.

So, I did some research and landed on Autodesk’s Fusion 360. It seemed promising, especially since I’ve been eyeing 3D printing for future tinkering. I downloaded it, spent a few weeks messing around… and, well, it just didn’t feel right. Sure, it’s powerful for certain things, but it lacked that effortless flow I love in SketchUp. I was facing a steep learning curve all over again, and progress felt sluggish.

A few items we plan to change on this side. We are not wild about the pass-through into the den – we would rather use this as more cabinet space. We also don’t like how the refrigerator must be recessed deep into the wall so it won’t stick out towards the island. Our current plan is to move this wall back so it is even all the way across, but that means those cabinets on the left will be moved back, leaving the refrigerator sticking out in the room. It has always been too close to the center island, and we have not been all that happy with this Samsung refrigerator anyway. It has always given us trouble, especially with the ice maker. So we are thinking of swapping it out for a shallow yet wide built-in refrigerator. Still thinking on that idea.

The real kicker? The 3D Warehouse. Oh man, I missed that treasure trove big time. In SketchUp, I can pop over to the Warehouse and grab spot-on models for cabinets, refrigerators, stoves—you name it. It even had the exact oven and microwave combo we had installed recently, ready to drop into my design. With Fusion, finding compatible models meant scouring the internet’s dusty corners, dealing with weird formats, and fiddling with conversions that half the time didn’t work. It was like trying to fit a square peg in a round hole—frustrating and time-consuming.

This shows more detail of how we plan to install a shallow refrigerator and move that wall back to give us more room around the island, and more cabinets in the kitchen by closing off that adjoining opening. I plopped the range hood in place but am not wild about this style of range hood. Everything is going to be build around the center island – it isn’t going anywhere!

After a few weeks of stubborn persistence, I finally waved the white flag and renewed my SketchUp Pro license. Best decision I’ve made in a while. Trimble’s added some slick new features (like better visualization tools that make everything look even more realistic right in the model), and the speed? Night and day. I’m flying through ideas again, way faster and easier than with Fusion or anything else I tried.

Now, Phase 1 of the kitchen remodel is underway in earnest. Can’t wait to see this come together—stay tuned for updates!

Comments

Leave a Reply